Arduino Install Bootloader on UNO, MEGA, NANO

23
142



This video explains how to install BOOTLOADER onto UNO,MEGA & NANO boards
A working UNO board is used as MASTER & bootloader is installed onto target boards using ISP

For MEGA skip to 3:50
For NANO skip to 6:25

Nguồn:https://quydinh.com/

Xem Thêm Bài Viết Khác:https://quydinh.com/cong-nghe

23 COMMENTS

  1. Sir, In the case of UNO, Why cant we just directly connect the Digital pins of Master to the ICSP pins available on the slave, just like we did for Nano?

  2. Great video thank you! You are straight to the point, have nice graphics making it clear what is required to be connected. I just hope this is an example to other video makers on how to make an effective video. Well done!

  3. error

    avrdude: Yikes! Invalid device signature.

    Double check connections and try again, or use -F to override

    this check.

    Error while burning bootloader.

  4. dear sir, i am facing porblem in uploading codes in MEGA even after uploading bootloader. It is chinese clone.

    Sketch uses 1460 bytes (0%) of program storage space. Maximum is 253952 bytes.

    Global variables use 9 bytes (0%) of dynamic memory, leaving 8183 bytes for local variables. Maximum is 8192 bytes.

    avrdude: stk500v2_ReceiveMessage(): timeout

    avrdude: stk500v2_ReceiveMessage(): timeout

    avrdude: stk500v2_ReceiveMessage(): timeout

    avrdude: stk500v2_ReceiveMessage(): timeout

    avrdude: stk500v2_ReceiveMessage(): timeout

    avrdude: stk500v2_ReceiveMessage(): timeout

    avrdude: stk500v2_getsync(): timeout communicating with programmer

    An error occurred while uploading the sketch

  5. Thank you, I found this very helpful. I recently purchased an Arduino Mega Pro, but it was missing a boot loader and blink (test) program. I managed to add both after watching your presentation. Thanks again.

LEAVE A REPLY

Please enter your comment!
Please enter your name here